MAC BROKEN SCREW EXTRACTOR KIT HOW TO
MAC BROKEN SCREW EXTRACTOR KIT DRIVER
MAC BROKEN SCREW EXTRACTOR KIT PRO
MAC BROKEN SCREW EXTRACTOR KIT FREE

Pro Tip 2: Consider manually running the extractor out. If it still doesn’t work, try the next size up. Most screws will only require 1/16″ or so to work, but you might need to go a little further on some. Pro Tip 1: If the screw extractor doesn’t bite, drill or bore out a little more of the head. Once that happens, just keep turning until your screw is safely out. The screw extractor will twist down until it grabs hold of the screw. If you’re using a drill in reverse, turn the screw extractor into the guide hole you’ve drilled. At this point, you can finally put the screw extractor to use.

MAC BROKEN SCREW EXTRACTOR KIT HOW TO

Just compare each bit to the screw and choose the best size.Īs you can probably tell, we find double-ended screw extractor sets easier to use.įor a tutorial on how to use a screw extractor, it feels like we took a long time to get to the actual screw extraction, doesn’t it? Well, here we are.

The nice thing is that the double-ended bit already matches up with the proper extractor size, so there’s no guesswork. If you’re using a burnishing/extractor double-ended bit, you’ll need to kick your drill into reverse to use it properly.

MAC BROKEN SCREW EXTRACTOR KIT DRIVER

You also want to use a drill for this process as the mechsnism on an impact driver doesn’t deliver a smooth action. Don’t ruin the whole thing by rushing the process. If you’re stopping to remove a screw, then there’s some value in protecting your workpiece. Depending on the size of the screw extractor you plan to use, you probably only need to drill down about 1/8″ to 1/4″. Keeping your drill bit straight, drill down slowly into the screw. To make your life easier, add a little bit of thread cutting oil to the head of the screw. Next, find a drill bit that has a smaller diameter than the screw you need to remove. Pro Tip: If you’re working a bolt or plug out of an engine, mind those metal shards – you don’t want them falling into the engine block! Step 4: Drilling a Guide Hole If that’s the set you have, skip the punching and drilling step. Some screw extractors have a burnishing end that you can use to drill out the screw head directly. This will create an indentation in the very center of the screw that will help guide the drill bit. To do this, you align a punch to the center of the screw and hammer it down lightly. With a basic screw extractor, you may need to provide some space in the screw head for it to work. That means drilling or expanding a hole in that old screw. You may also want a pair of gloves if you’re concerned about metal shavings cutting you. You always want to protect your eyeballs from debris.

Thread cutting oil and/or penetrating oilĭon those safety glasses, because your work could potentially send a few metal shards flying about.

Drill bits (not needed if your extractor has a boring end).

Drill (we do not recommend using an impact driver-too much torque and speed).

You need a few tools depending on the type and size of fastener as well as the material you’re trying to remove it from: How to Use a Screw Extractor – Step by Step Step 1: Gather Some Needed Tools Makes sense, right?īasically, after punching or drilling into the top of your busted-up screw, you’ll use a screw extractor to bite down into the screw and twist it back out of whatever it was holding together. This helps it lock into and remove damaged screws. While brands vary, the most common design uses a tapered drill bit with reverse threading. The key to the screw extractor’s usefulness lies in its general design. How a Screw Extractor Removes Damaged Screws If you’re just starting out, or you find yourself apprenticing with a Pro, we can show you how to extract a screw as if you’ve been doing it for years. It will let you quickly remove those pesky worn and weathered fasteners with a minimal amount of frustration.Īny Pro from mechanics to woodworkers should keep a set of screw extractors close by. Keep a relatively inexpensive screw extractor on hand. Rounded out and stripped screws can throw a real wrench in your productivity, but they don’t have to bring your work to a grinding halt. Other times, however, you’ve simply got to get it out. Sometimes you can cut or bend off a fastener and it’s fine.

MAC BROKEN SCREW EXTRACTOR KIT FREE

Slowly keep turning the screw/bolt/plug out until it works free.

Flip the bit around and use constant pressure in reverse (slooooooow speed) to drive in the extractor until it bites.

Using your drill in reverse, slowly bore out the damaged head.

Look for hardened steel-these bits need to be strong.

Use a set with double-ended boring/screw extracting bits-they’re easier.

How to Use a Screw Extractor – Step by Step.

How a Screw Extractor Removes Damaged Screws.

Mac broken screw extractor kit